Clinton County Prevailing Wage for July 2006
-
Trade Name RG TYP C Base FRMAN *M-F>8 OSA OSH H/W Pensn Vac Trng
==================== == === = ====== ====== ===== === === ===== ===== ===== =====
ASBESTOS ABT-GEN ALL 22.400 22.900 1.5 1.5 2.0 5.000 6.950 0.000 0.600
ASBESTOS ABT-MEC BLD 25.290 26.290 1.5 1.5 2.0 4.450 2.500 0.000 0.250
BOILERMAKER BLD 27.750 30.250 1.5 1.5 2.0 6.820 10.28 0.000 0.210
BRICK MASON BLD 25.520 27.170 1.5 1.5 2.0 4.750 7.700 2.000 0.420
CARPENTER ALL 30.480 31.980 1.5 1.5 2.0 5.000 3.750 0.000 0.350
CEMENT MASON ALL 26.200 26.950 1.5 1.5 2.0 5.000 7.750 0.000 0.100
CERAMIC TILE FNSHER BLD 22.610 0.000 1.5 1.5 2.0 5.000 4.300 0.000 0.400
ELECTRIC PWR EQMT OP ALL 30.610 36.890 1.5 2.0 2.0 4.380 7.650 0.000 0.150
ELECTRIC PWR GRNDMAN ALL 22.860 36.890 1.5 2.0 2.0 3.270 5.710 0.000 0.110
ELECTRIC PWR LINEMAN ALL 35.190 36.890 1.5 2.0 2.0 5.030 8.800 0.000 0.180
ELECTRIC PWR TRK DRV ALL 24.980 36.890 1.5 2.0 2.0 3.570 6.250 0.000 0.120
ELECTRICIAN E ALL 32.180 34.430 1.5 1.5 2.0 5.150 5.800 0.000 0.480
ELECTRICIAN W ALL 31.460 33.350 1.5 1.5 2.0 5.030 6.130 0.000 0.470
ELECTRONIC SYS TECH E BLD 24.420 25.920 1.5 1.5 2.0 5.150 3.170 0.000 0.250
ELECTRONIC SYS TECH W BLD 22.970 24.470 1.5 1.5 2.0 2.800 4.690 2.250 0.250
ELEVATOR CONSTRUCTOR BLD 35.099 39.490 2.0 2.0 2.0 7.775 5.090 2.110 0.000
FLOOR LAYER BLD 26.930 27.680 1.5 1.5 2.0 5.000 3.750 0.000 0.350
GLAZIER BLD 28.810 0.000 2.0 2.0 2.0 8.050 6.420 2.310 0.160
HT/FROST INSULATOR BLD 29.640 30.640 1.5 1.5 2.0 4.450 7.860 0.000 0.450
IRON WORKER ALL 25.390 26.890 1.5 1.5 2.0 6.210 7.900 0.000 0.420
LABORER ALL 21.900 22.400 1.5 1.5 2.0 5.000 6.950 0.000 0.600
MACHINIST BLD 36.890 38.890 2.0 2.0 2.0 4.380 5.650 2.550 0.000
MARBLE FINISHERS BLD 22.610 0.000 1.5 1.5 2.0 5.000 4.300 0.000 0.400
MILLWRIGHT ALL 30.480 31.980 1.5 1.5 2.0 5.000 3.750 0.000 0.350
OPERATING ENGINEER ALL 1 25.350 26.480 1.5 1.5 2.0 5.900 10.60 0.000 1.000
OPERATING ENGINEER ALL 2 24.220 26.480 1.5 1.5 2.0 5.900 10.60 0.000 1.000
OPERATING ENGINEER ALL 3 19.740 26.480 1.5 1.5 2.0 5.900 10.60 0.000 1.000
OPERATING ENGINEER ALL 4 19.800 26.480 1.5 1.5 2.0 5.900 10.60 0.000 1.000
OPERATING ENGINEER ALL 5 19.470 26.480 1.5 1.5 2.0 5.900 10.60 0.000 1.000
OPERATING ENGINEER ALL 6 25.900 26.480 1.5 1.5 2.0 5.900 10.60 0.000 1.000
OPERATING ENGINEER ALL 7 26.200 26.480 1.5 1.5 2.0 5.900 10.60 0.000 1.000
OPERATING ENGINEER ALL 8 26.480 26.480 1.5 1.5 2.0 5.900 10.60 0.000 1.000
PAINTER BLD 25.700 26.700 1.5 1.5 2.0 4.650 5.150 0.000 0.350
PAINTER HWY 26.800 27.800 1.5 1.5 2.0 4.650 5.150 0.000 0.350
PAINTER OVER 30FT BLD 26.700 27.700 1.5 1.5 2.0 4.650 5.150 0.000 0.350
PAINTER PWR EQMT BLD 26.700 27.700 1.5 1.5 2.0 4.650 5.150 0.000 0.350
PAINTER PWR EQMT HWY 27.800 28.800 1.5 1.5 2.0 4.650 5.150 0.000 0.350
PILEDRIVER ALL 30.480 31.980 1.5 1.5 2.0 5.000 3.750 0.000 0.350
PIPEFITTER E BLD 28.500 30.500 1.5 1.5 2.0 4.700 4.850 0.000 0.700
PIPEFITTER NW BLD 29.000 31.000 1.5 1.5 2.0 5.440 7.000 0.000 0.400
PIPEFITTER SW BLD 30.000 32.500 1.5 1.5 2.0 5.600 3.750 0.000 0.375
PLASTERER BLD 26.150 27.150 1.5 1.5 2.0 5.000 7.000 0.000 0.250
PLUMBER E BLD 28.500 30.500 1.5 1.5 2.0 4.700 4.850 0.000 0.700
PLUMBER NW BLD 29.450 31.950 1.5 1.5 2.0 4.800 5.200 0.000 0.250
PLUMBER SW BLD 30.000 32.500 1.5 1.5 2.0 5.600 3.750 0.000 0.375
ROOFER BLD 26.250 28.250 1.5 1.5 5.7 6.100 5.950 0.000 0.200
SHEETMETAL WORKER ALL 27.210 28.460 1.5 1.5 2.0 6.000 4.770 1.630 0.120
SPRINKLER FITTER BLD 33.230 35.230 2.0 2.0 2.0 5.900 6.600 0.000 0.650
TERRAZZO FINISHER BLD 30.050 0.000 1.5 1.5 2.0 0.000 0.000 0.000 0.000
TERRAZZO MASON BLD 29.550 29.850 1.5 1.5 2.0 0.000 3.750 0.000 0.000
TRUCK DRIVER ALL 1 24.905 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER ALL 2 25.305 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER ALL 3 25.505 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER ALL 4 25.755 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER ALL 5 26.505 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER O&C 1 19.924 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER O&C 2 20.244 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER O&C 3 20.404 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER O&C 4 20.604 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
TRUCK DRIVER O&C 5 21.204 0.000 1.5 1.5 2.0 7.000 3.200 0.000 0.000
Legend: M-F>8 (Overtime is required for any hour greater than 8 worked
each day, Monday through Friday.
OSA (Overtime is required for every hour worked on Saturday)
OSH (Overtime is required for every hour worked on Sunday and Holidays)
H/W (Health & Welfare Insurance)
Pensn (Pension)
Vac (Vacation)
Trng (Training)
Explanations
-
CLINTON COUNTY
ELECTRICIANS (WEST) - Townships of St. Rose, Wheatfield, Sugar Creek,
Breese, Wade, Carlyle, Looking Glass, and German Town.
ELECTRONIC SYSTEMS TECHNICIAN (WEST) - Townships of St. Rose,
Wheatfield, Sugar Creek, Breese, Wade, Carlyle, Looking Glass, and
Germantown.
ELECTRONIC SYSTEMS TECHNICIAN (EAST) - Townships not included in WEST.
PLUMBERS & PIPEFITTERS (EAST) - That part of the county East of a
North-South line 2.5 miles East of Rt. 127.
PLUMBERS & PIPEFITTERS (SOUTHWEST) - That part of the county South of
New Route 50 and West of Route 127 inclusive.
The following list is considered as those days for which holiday rates
of wages for work performed apply: New Years Day, Memorial/Decoration
Day, Fourth of July, Labor Day, Veterans Day, Thanksgiving Day,
Christmas Day. Generally, any of these holidays which fall on a
Sunday is celebrated on the following Monday. This then makes work
performed on that Monday payable at the appropriate overtime rate for
holiday pay. Common practice in a given local may alter certain days
of celebration such as the day after Thanksgiving for Veterans Day.
If in doubt, please check with IDOL.
Oil and chip resealing (O&C) means the application of road oils and
liquid asphalt to coat an existing road surface, followed by
application of aggregate chips or gravel to coated surface, and
subsequent rolling of material to seal the surface.
EXPLANATION OF CLASSES
ASBESTOS - GENERAL - removal of asbestos material/mold and hazardous
materials from any place in a building, including mechanical systems
where those mechanical systems are to be removed. This includes the
removal of asbestos materials/mold and hazardous materials from
ductwork or pipes in a building when the building is to be demolished
at the time or at some close future date.
ASBESTOS - MECHANICAL - removal of asbestos material from mechanical
systems, such as pipes, ducts, and boilers, where the mechanical
systems are to remain.
CERAMIC TILE FINISHER AND MARBLE FINISHER
The handling, at the building site, of all sand, cement, tile, marble
or stone and all other materials that may be used and installed by [a]
tile layer or marble mason. In addition, the grouting, cleaning,
sealing, and mixing on the job site, and all other work as required in
assisting the setter. The term "Ceramic" is used for naming the
classification only and is in no way a limitation of the product
handled. Ceramic takes into consideration most hard tiles.
ELECTRONIC SYSTEMS TECHNICIAN
Installation, service and maintenance of low-voltage systems which
utilizes the transmission and/or transference of voice, sound, vision,
or digital for commercial, education, security and entertainment
purposes for the following: TV monitoring and surveillance,
background/foreground music, intercom and telephone interconnect,
field programming, inventory control systems, microwave transmission,
multi-media, multiplex, radio page, school, intercom and sound burglar
alarms and low voltage master clock systems.
Excluded from this classification are energy management systems, life
safety systems, supervisory controls and data acquisition systems not
intrinsic with the above listed systems, fire alarm systems, nurse
call systems and raceways exceeding fifteen feet in length.
TRUCK DRIVER - BUILDING, HEAVY AND HIGHWAY CONSTRUCTION
Class 1. Drivers on 2 axle trucks hauling less than 9 ton. Air
compressor and welding machines and brooms, including those pulled by
separate units, truck driver helpers, warehouse employees, mechanic
helpers, greasers and tiremen, pickup trucks when hauling materials,
tools, or workers to and from and on-the-job site, and fork lifts up
to 6,000 lb. capacity.
Class 2. Two or three axle trucks hauling more than 9 ton but hauling
less than 16 ton. A-frame winch trucks, hydrolift trucks, vactor
trucks or similar equipment when used for transportation purposes.
Fork lifts over 6,000 lb. capacity, winch trucks, four axle
combination units, and ticket writers.
Class 3. Two, three or four axle trucks hauling 16 ton or more.
Drivers on water pulls, articulated dump trucks, mechanics and working
forepersons, and dispatchers. Five axle or more combination units.
Class 4. Low Boy and Oil Distributors.
Class 5. Drivers who require special protective clothing while
employed on hazardous waste work.
TRUCK DRIVER - OIL AND CHIP RESEALING ONLY.
This shall encompass laborers, workers and mechanics who drive
contractor or subcontractor owned, leased, or hired pickup, dump,
service, or oil distributor trucks. The work includes transporting
materials and equipment (including but not limited to, oils, aggregate
supplies, parts, machinery and tools) to or from the job site;
distributing oil or liquid asphalt and aggregate; stock piling
material when in connection with the actual oil and chip contract.
The Truck Driver (Oil & Chip Resealing) wage classification does not
include supplier delivered materials.
OPERATING ENGINEERS
GROUP I. Cranes, Dragline, Shovels, Skimmer Scoops, Clamshells or
Derrick Boats, Pile Drivers, Crane-Type Backhoes, Asphalt Plant
Operators, Concrete Plant Operators, Dredges, Asphalt Spreading
Machines, All Locomotives, Cable Ways, or Tower Machines, Hoists,
Hydraulic Backhoes, Ditching Machines or Backfiller, Cherrypickers,
Overhead Cranes, Roller, Steam or Gas, Concrete Pavers, Excavators,
Concrete Breakers, Concrete Pumps, Bulk Cement Plants, Cement Pumps,
Derrick-Type Drills, Boat Operators, Motor Graders or Pushcats, Scoops
or Tournapulls, Bulldozers, Endloaders or Fork Lifts, Power Blade or
Elevating Graders, Winch Cats, Boom or Winch Trucks or Boom Tractors,
Pipe Wrapping or Painting Machines, Asphalt Plant Engineer, Journeyman
Lubricating Engineer, Drills (other than Derrick Type), Mud Jacks, or
Well Drilling Machines, Boring Machines or Track Jacks, Mixers,
Conveyors (Two), Air Compressors (Two), Water Pumps regardless of
size (Two), Welding Machines (Two), Siphons or Jets (Two), Winch Heads
or Apparatuses (Two), Light Plants (Two), Waterblasters (two), All
Tractors regardless of size (straight tractor only), Fireman on
Stationary Boilers, Automatic Elevators, Form Grading Machines,
Finishing Machines, Power Sub-Grader or Ribbon Machines, Longitudinal
Floats, Distributor Operators on Trucks, Winch Heads or Apparatuses
(One), Mobil Track air and heaters (two to five), Heavy Equipment
Greaser, Relief Operator, Assistant Master Mechanic and Heavy Duty
Mechanic, all Operators (except those listed below).
GROUP II. Assistant Operators.
GROUP III. Air Compressors (One), Water Pumps, regardless of Size
(One), Waterblasters (one), Welding Machine (One), Mixers (One Bag),
Conveyor (One), Siphon or Jet (One), Light Plant (One), Heater (One),
Immobile Track Air (One), and Self Propelled Walk-Behind Rollers.
GROUP IV. Asphalt Spreader Oilers, Fireman on Whirlies and Heavy
Equipment Oilers, Truck Cranes, Dredges, Monigans, Large Cranes -
(Over 65-ton rated capacity) Concrete Plant Oiler, Blacktop Plant
Oiler, and Creter Crane Oiler (when required).
GROUP V. Oiler.
GROUP VI. Master Mechanics, Operators on equipment with Booms,
including jibs, 100 feet and over, and less than 150 feet long.
GROUP VII. Operators on equipment with Booms, including jibs, 150
feet and over, and less than 200 feet long.
GROUP VIII. Operators on Equipment with Booms, including jibs, 200
feet and over; Tower Cranes; Whirlie Cranes; and Operator Foreman.
TERRAZZO FINISHER
The handling of all materials used for Mosaic and Terrazzo work
including preparing, mixing by hand, by mixing machine or transporting
of pre-mixed materials and distributing with shovel, rake, hoe, or
pail, all kinds of concrete foundations necessary for Mosaic and
Terrazzo work, all cement terrazzo, magnesite terrazzo, Do-O-Tex
terrazzo, epoxy matrix ter-razzo, exposed aggregate, rustic or rough
washed for exterior or interior of buildings placed either by machine
or by hand, and any other kind of mixture of plastics composed of
chips or granules when mixed with cement, rubber, neoprene, vinyl,
magnesium chloride or any other resinous or chemical substances used
for seamless flooring systems, and all other building materials, all
similar materials and all precast terrazzo work on jobs, all scratch
coat used for Mosaic and Terrazzo work and sub-bed, tar paper and wire
mesh (2x2 etc.) or lath. The rubbing, grinding, cleaning and
finishing of same either by hand or by machine or by terrazzo
resurfacing equipment on new or existing floors. When necessary
finishers shall be allowed to assist the mechanics to spread sand bed,
lay tarpaper and wire mesh (2x2 etc.) or lath. The finishing of
cement floors where additional aggregate of stone is added by
spreading or sprinkling on top of the finished base, and troweled or
rolled into the finish and then the surface is ground by grinding
machines.
Other Classifications of Work:
For definitions of classifications not otherwise set out, the
Department generally has on file such definitions which are available.
If a task to be performed is not subject to one of the classifications
of pay set out, the Department will upon being contacted state which
neighboring county has such a classification and provide such rate,
such rate being deemed to exist by reference in this document. If no
neighboring county rate applies to the task, the Department shall
undertake a special determination, such special determination being
then deemed to have existed under this determination. If a project
requires these, or any classification not listed, please contact IDOL
at 618/993-7271 for wage rates or clarifications.
LANDSCAPING
Landscaping work falls under the existing classifications for laborer,
operating engineer and truck driver. The work performed by landscape
plantsman and landscape laborer is covered by the existing
classification of laborer. The work performed by landscape operators
(regardless of equipment used or its size) is covered by the
classifications of operating engineer. The work performed by
landscape truck drivers (regardless of size of truck driven) is
covered by the classifications of truck driver.
|