Explanations

PERRY COUNTY

The following list is considered as those days for which holiday rates
of wages for work performed apply: New Years Day, Memorial/Decoration
Day, Fourth of July, Labor Day, Veterans Day, Thanksgiving Day,
Christmas Day. Generally, any of these holidays which fall  on a
Sunday is celebrated on the following Monday.  This then makes work
performed on that Monday payable at the appropriate overtime rate for
holiday pay.   Common practice in a given local may alter certain days
of celebration such as the day after Thanksgiving for Veterans Day.
If in doubt, please check with IDOL.

OIL AND CHIP RESEALING means the application of road oils and liquid
asphalt to coat an existing road surface, followed by  application of
aggregate chips or gravel to coated surface, and subsequent rolling of
material to seal the surface.

EXPLANATION OF CLASSES

ASBESTOS - GENERAL - removal of asbestos material/mold and hazardous
materials from any place in a building, including mechanical systems
where those mechanical systems are to be removed.  This includes the
removal of asbestos materials/mold and hazardous materials from
ductwork or pipes in a building when the building is to be demolished
at the time or at some close future date.

ASBESTOS - MECHANICAL - removal of asbestos material from mechanical
systems, such as pipes, ducts, and boilers, where the mechanical
systems are to  remain.

LABORER - OIL AND CHIP RESEALING ONLY

Hook and unhook chip box from aggregate truck; distribute material
within chip box; perform flagging work related to oil and chip
resealing; hand spray oil fluids; handle traffic control, including
setting-up and maintaining barricades, drums, cones, delineators,
signs and other such items, as  well as laying-out and applying or
removing temporary roadway markings used to control traffic in job
site related to oil and chip resealing; and perform clean- up related
to oil and chip resealing.

CERAMIC TILE FINISHER, MARBLE FINISHER, TERRAZZO FINISHER

Assisting, helping or supporting the tile, marble and terrazzo
mechanic by performing their historic and traditional work assignments
required to complete the proper installation of the work covered by
said crafts. The term "Ceramic" is used for naming the classification
only, and is in no a limitation of the product handled.  Ceramic takes
into consideration most hard tiles.

ELECTRONIC SYSTEMS TECHNICIAN

Installation, service and maintenance of low-voltage systems which
utilizes the transmission and/or transference of voice, sound, vision,
or digital for commercial, education, security and entertainment
purposes for the following:  TV monitoring and surveillance,
background/foreground music, intercom and telephone interconnect,
field programming, inventory control systems, microwave transmission,
multi-media, multiplex, radio page, school, intercom and sound burglar
alarms and low voltage master clock systems.

Excluded from this classification are energy management systems, life
safety systems, supervisory controls and data acquisition systems not
intrinsic with the above listed systems, fire alarm systems, nurse
call systems and raceways exceeding fifteen feet in length.

TRUCK DRIVER - BUILDING, HEAVY AND HIGHWAY CONSTRUCTION
Class 1.  Drivers on 2 axle trucks hauling less than 9 ton.  Air
compressor and welding machines and brooms, including those pulled by
separate units, truck driver  helpers, warehouse employees, mechanic
helpers, greasers and tiremen, pickup trucks when hauling materials,
tools, or workers to and from and on-the-job  site, and fork lifts up
to 6,000 lb. capacity.

Class 2.  Two or three axle trucks hauling more than 9 ton but hauling
less than 16 ton.  A-frame winch trucks, hydrolift trucks, vactor
trucks or similar  equipment when used for transportation purposes.
Fork lifts over 6,000 lb. capacity, winch trucks, four axle
combination units, and ticket writers.

Class 3.  Two, three or four axle trucks hauling 16 ton or more.
Drivers on water pulls, articulated dump trucks, mechanics and working
forepersons, and  dispatchers.  Five axle or more combination units.

Class 4.  Low Boy and Oil Distributors.

Class 5.  Drivers who require special protective clothing while
employed on hazardous waste work.

TRUCK DRIVER - O & C (Oil and Chip Resealing ONLY)

It involves driving of contractor or subcontractor owned, leased, or
hired pickup, dump,  service, or oil distributor trucks.  Includes
transporting materials and equipment (including, but not limited to
oils, aggregate supplies, parts, machinery and  tools) to or from the
job site; distributing oil or liquid asphalt and aggregate; stock
piling material; and maintaining trucks at job site related to oil and
chip  resealing.

Class 1.  Distributors, liquid asphalt hauling and hauling of asphalt
rubber-tired rollers.

Class 2.  Stockpiling.

Class 3.  Tandem hauling to job site.

OPERATING ENGINEERS

GROUP I.  Cranes, Dragline, Shovels, Skimmer Scoops, Clamshells or
Derrick Boats, Pile Drivers, Crane-Type Backhoes, Asphalt Plant
Operators, Concrete Plant  Operators, Dredges, Asphalt Spreading
Machines, All Locomotives, Cable Ways, or Tower Machines, Hoists,
Hydraulic Backhoes, Ditching Machines or Backfiller,  Cherrypickers,
Overhead Cranes, Roller, Steam or Gas, Concrete Pavers, Excavators,
Concrete Breakers, Concrete Pumps, Bulk Cement Plants, Cement Pumps,
Derrick-Type Drills, Boat Operators, Motor Graders or Pushcats, Scoops
or Tournapulls, Bulldozers, Endloaders or Fork Lifts, Power Blade or
Elevating Graders,  Winch Cats, Boom or Winch Trucks or Boom Tractors,
Pipe Wrapping or Painting Machines, Asphalt Plant Engineer, Journeyman
Lubricating Engineer, Drills (other  than Derrick Type), Mud Jacks, or
Well Drilling Machines, Boring Machines or Track Jacks, Mixers,
Conveyors (Two), Air Compressors (Two), Water Pumps  regardless of
size (Two), Welding Machines (Two), Siphons or Jets (Two), Winch Heads
or Apparatuses (Two), Light Plants (Two), Waterblasters (two), All
Tractors regardless of size (straight tractor only), Fireman on
Stationary Boilers, Automatic Elevators, Form Grading Machines,
Finishing Machines, Power  Sub-Grader or Ribbon Machines, Longitudinal
Floats,  Distributor Operators on Trucks, Winch Heads or Apparatuses
(One), Mobil Track air and heaters (two to  five), Heavy Equipment
Greaser, Relief Operator, Assistant Master Mechanic and Heavy Duty
Mechanic, all Operators (except those listed below).

GROUP II.  Assistant Operators.

GROUP III.  Air Compressors (One), Water Pumps, regardless of Size
(One), Waterblasters (one), Welding Machine (One), Mixers (One Bag),
Conveyor (One), Siphon  or Jet (One), Light Plant (One), Heater (One),
Immobile Track Air (One), and Self Propelled Walk-Behind Rollers.
GROUP IV.  Asphalt Spreader Oilers, Fireman on Whirlies and Heavy
Equipment Oilers, Truck Cranes, Dredges, Monigans, Large Cranes -
(Over 65-ton rated  capacity) Concrete Plant Oiler, Blacktop Plant
Oiler, and Creter Crane Oiler (when required).

GROUP V.  Oiler.

GROUP VI.  Master Mechanics, Operators on equipment with Booms,
including jibs, 100 feet and over, and less than 150 feet long.

GROUP VII.  Operators on equipment with Booms, including jibs, 150
feet and over, and less than 200 feet long.

GROUP VIII.  Operators on Equipment with Booms, including jibs, 200
feet and over; Tower Cranes; Whirlie Cranes; and Operator Foreman.

OPERATING ENGINEER - O & C (Oil and Chip Resealing ONLY). Includes the
operation of all motorized heavy equipment used in oil and chip
rsealing, including but not limited to operating self-propelled chip
spreaders, and all types of rollers (both hard and rubber tired); and
other duties pertaining to the operation or maintenance of heavy
equipment related to oil and chip resealing.

Class 1.  See Class 1 above for types of equipment operated.

Class 2.  See Class 2 above for types of equipment operated.

Class 3.  See Class 3 above for types of equipment operated.

Class 4.  See Class 4 above for types of equipment operated.

Class 5.  See Class 5 above for types of equipment operated.

Other Classifications of Work:

For definitions of classifications not otherwise set out, the
Department generally has on file such definitions which are available.
If a task to be performed is not subject to one of the classifications
of pay set out, the Department will  upon being contacted state which
neighboring county has such a classification and provide such rate,
such rate being deemed to exist by reference in this  document.  If no
neighboring county rate applies to the task, the Department shall
undertake a special determination, such special determination  being
then deemed to have existed under this determination.  If a project
requires these, or any classification not listed, please contact IDOL
at 618/993-7271 for  wage rates or clarifications.

LANDSCAPING

Landscaping work falls under the existing classifications for laborer,
operating engineer and truck driver.  The work performed by landscape
plantsman and  landscape laborer is covered by the existing
classification of laborer.  The work performed by landscape operators
(regardless of equipment used or its size) is  covered by the
classifications of operating engineer.  The work performed by
landscape truck drivers (regardless of size of truck driven) is
covered by the  classifications of truck driver.