Ogle County Prevailing Wage for November 2009
-
Trade Name RG TYP C Base FRMAN *M-F>8 OSA OSH H/W Pensn Vac Trng
==================== == === = ====== ====== ===== === === ===== ===== ===== =====
ASBESTOS ABT-GEN BLD 28.660 29.660 1.5 1.5 2.0 7.290 10.63 0.000 0.800
ASBESTOS ABT-MEC BLD 18.950 0.000 1.5 1.5 2.0 2.700 3.350 0.000 0.000
BOILERMAKER BLD 34.170 37.170 2.0 2.0 2.0 6.820 8.550 0.000 0.350
BRICK MASON BLD 34.500 37.250 1.5 1.5 2.0 6.550 10.96 0.000 0.510
CARPENTER HWY 30.640 32.390 1.5 1.5 2.0 6.300 8.990 0.000 0.400
CARPENTER N BLD 34.010 37.750 1.5 1.5 2.0 6.550 10.50 0.000 0.600
CARPENTER S BLD 31.270 34.710 1.5 1.5 2.0 7.100 10.87 0.000 0.600
CEMENT MASON ALL 32.500 35.250 1.5 1.5 2.0 6.550 11.83 0.000 0.150
CERAMIC TILE FNSHER BLD 29.530 0.000 1.5 1.5 2.0 6.550 4.230 0.000 0.440
COMMUNICATION TECH BLD 32.730 36.000 1.5 1.5 2.0 9.390 9.320 0.000 0.650
ELECTRIC PWR EQMT OP ALL 31.790 40.830 1.5 1.5 2.0 4.750 9.850 0.000 0.240
ELECTRIC PWR GRNDMAN ALL 24.630 40.830 1.5 1.5 2.0 4.750 7.640 0.000 0.180
ELECTRIC PWR LINEMAN ALL 37.810 40.830 1.5 1.5 2.0 4.750 11.71 0.000 0.280
ELECTRIC PWR TRK DRV ALL 25.440 40.830 1.5 1.5 2.0 4.750 7.880 0.000 0.190
ELECTRICIAN BLD 38.520 42.370 1.5 1.5 2.0 9.390 13.96 0.000 0.770
ELEVATOR CONSTRUCTOR BLD 41.310 46.470 2.0 2.0 2.0 9.525 8.210 2.480 0.000
GLAZIER BLD 30.330 31.330 1.5 1.5 2.0 7.500 7.250 0.000 0.750
HT/FROST INSULATOR BLD 32.680 35.130 1.5 1.5 2.0 7.250 12.07 0.000 0.000
IRON WORKER ALL 35.000 36.750 2.0 2.0 2.0 7.700 18.76 0.000 1.200
LABORER BLD 28.660 29.660 1.5 1.5 2.0 7.290 10.63 0.000 0.800
LABORER HWY 27.510 28.260 1.5 1.5 2.0 7.290 10.63 0.000 0.800
LABORER, SKILLED HWY 29.360 30.110 1.5 1.5 2.0 7.290 10.63 0.000 0.800
LATHER N BLD 34.010 37.750 1.5 1.5 2.0 6.550 10.50 0.000 0.600
LATHER S BLD 31.270 34.710 1.5 1.5 2.0 7.100 10.87 0.000 0.600
MACHINIST BLD 42.770 44.770 1.5 1.5 2.0 7.750 8.690 0.650 0.000
MARBLE FINISHERS BLD 29.530 0.000 1.5 1.5 2.0 6.550 4.230 0.000 0.440
MARBLE MASON BLD 32.020 32.270 1.5 1.5 2.0 6.550 6.730 0.000 0.470
MATERIAL TESTER I ALL 21.550 0.000 1.5 1.5 2.0 7.460 4.840 0.000 0.170
MATERIALS TESTER II ALL 26.550 0.000 1.5 1.5 2.0 7.460 4.840 0.000 0.170
MILLWRIGHT BLD 33.970 37.370 1.5 1.5 2.0 6.550 12.35 0.000 0.500
OPERATING ENGINEER BLD 1 39.150 43.150 2.0 2.0 2.0 11.70 7.350 2.250 1.150
OPERATING ENGINEER BLD 2 38.450 43.150 2.0 2.0 2.0 11.70 7.350 2.250 1.150
OPERATING ENGINEER BLD 3 36.000 43.150 2.0 2.0 2.0 11.70 7.350 2.250 1.150
OPERATING ENGINEER BLD 4 34.000 43.150 2.0 2.0 2.0 11.70 7.350 2.250 1.150
OPERATING ENGINEER HWY 1 39.000 43.000 1.5 1.5 2.0 11.70 7.350 2.250 1.150
OPERATING ENGINEER HWY 2 38.450 43.000 1.5 1.5 2.0 11.70 7.350 2.250 1.150
OPERATING ENGINEER HWY 3 37.150 43.000 1.5 1.5 2.0 11.70 7.350 2.250 1.150
OPERATING ENGINEER HWY 4 35.700 43.000 1.5 1.5 2.0 11.70 7.350 2.250 1.150
OPERATING ENGINEER HWY 5 34.350 43.000 1.5 1.5 2.0 11.70 7.350 2.250 1.150
PAINTER ALL 34.500 36.500 1.5 1.5 1.5 7.500 7.250 0.000 0.750
PILEDRIVER HWY 30.640 32.390 1.5 1.5 2.0 6.300 8.990 0.000 0.400
PILEDRIVER N BLD 35.010 38.860 1.5 1.5 2.0 6.550 10.50 0.000 0.600
PILEDRIVER S BLD 32.270 35.820 1.5 1.5 2.0 7.100 10.87 0.000 0.600
PIPEFITTER BLD 37.200 39.800 1.5 1.5 2.0 7.640 9.880 0.000 0.700
PLASTERER BLD 32.540 35.790 2.0 2.0 2.0 6.550 10.70 0.000 0.150
PLUMBER BLD 37.200 39.800 1.5 1.5 2.0 7.640 9.880 0.000 0.700
ROOFER BLD 37.000 40.000 1.5 1.5 2.0 7.250 5.270 0.000 0.330
SHEETMETAL WORKER BLD 34.160 36.090 1.5 1.5 2.0 5.150 13.51 0.520 0.290
SPRINKLER FITTER BLD 36.140 38.890 1.5 1.5 2.0 8.200 6.550 0.000 0.250
STONE MASON BLD 34.500 37.250 1.5 1.5 2.0 6.550 10.96 0.000 0.510
TERRAZZO FINISHER BLD 29.530 0.000 1.5 1.5 2.0 6.550 4.230 0.000 0.440
TERRAZZO MASON BLD 32.020 32.270 1.5 1.5 2.0 6.550 6.730 0.000 0.470
TILE LAYER N BLD 34.010 37.750 1.5 1.5 2.0 6.550 10.50 0.000 0.600
TILE LAYER S BLD 31.270 34.710 1.5 1.5 2.0 7.100 10.87 0.000 0.600
TILE MASON BLD 32.020 32.270 1.5 1.5 2.0 6.550 6.730 0.000 0.470
TRUCK DRIVER O&C 1 22.790 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER O&C 2 23.110 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER O&C 3 23.270 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER O&C 4 23.470 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER O&C 5 24.070 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER E ALL 1 32.550 33.100 1.5 1.5 2.0 6.500 4.350 0.000 0.000
TRUCK DRIVER E ALL 2 32.700 33.100 1.5 1.5 2.0 6.500 4.350 0.000 0.000
TRUCK DRIVER E ALL 3 32.900 33.100 1.5 1.5 2.0 6.500 4.350 0.000 0.000
TRUCK DRIVER E ALL 4 33.100 33.100 1.5 1.5 2.0 6.500 4.350 0.000 0.000
TRUCK DRIVER N ALL 1 25.880 26.430 1.5 1.5 2.0 5.150 6.500 0.000 0.000
TRUCK DRIVER N ALL 2 26.030 26.430 1.5 1.5 2.0 5.150 6.500 0.000 0.000
TRUCK DRIVER N ALL 3 26.230 26.430 1.5 1.5 2.0 5.150 6.500 0.000 0.000
TRUCK DRIVER N ALL 4 26.430 26.430 1.5 1.5 2.0 5.150 6.500 0.000 0.000
TRUCK DRIVER S ALL 1 28.475 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER S ALL 2 28.887 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER S ALL 3 29.087 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER S ALL 4 29.337 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TRUCK DRIVER S ALL 5 30.087 0.000 1.5 1.5 2.0 9.050 4.062 0.000 0.250
TUCKPOINTER BLD 34.500 37.250 1.5 1.5 2.0 6.550 10.96 0.000 0.510
Legend: M-F>8 (Overtime is required for any hour greater than 8 worked
each day, Monday through Friday.
OSA (Overtime is required for every hour worked on Saturday)
OSH (Overtime is required for every hour worked on Sunday and Holidays)
H/W (Health & Welfare Insurance)
Pensn (Pension)
Vac (Vacation)
Trng (Training)
Explanations
-
OGLE COUNTY
CARPENTER, LATHER, MILLWRIGHT, PILEDRIVER AND TILE LAYER (NORTH) -
That part of Ogle County East from the Winnebago County western
boundary and North of
an imaginary line running east and west located 4 miles north of the
City of Oregon.
TRUCK DRIVER (EAST) - That part of the county East of Rt. 251,
including all portions of the city of Rochelle, and South of Rt. 72.
TRUCK DRIVER (SOUTH) - That part of the county West of Rt. 251 and
South of Rt. 72.
TRUCK DRIVER (NORTH) - That part of the county North of Route 72.
The following list is considered as those days for which holiday rates
of wages for work performed apply:
New Years Day, Memorial/Decoration Day, Fourth of July, Labor Day,
Veterans Day, Thanksgiving Day, Christmas Day. Generally, any of these
holidays which fall on a Sunday is celebrated on the following
Monday. This then makes work performed on that Monday payable at the
appropriate overtime rate for holiday pay. Common practice in a given
local may alter certain days of celebration such as the day after
Thanksgiving for Veterans Day. If in doubt, please check with IDOL.
Oil and chip resealing (O&C) means the application of road oils and
liquid asphalt to coat an existing road surface, followed by
application of aggregate chips or gravel to coated surface, and
subsequent rolling of material to seal the surface.
EXPLANATION OF CLASSES
ASBESTOS - GENERAL - removal of asbestos material/mold and hazardous
materials from any place in a building, including mechanical systems
where those mechanical systems are to be removed. This includes the
removal of asbestos materials/mold and hazardous materials from
ductwork or pipes in a building when the building is to be demolished
at the time or at some close future date.
ASBESTOS - MECHANICAL - removal of asbestos material from mechanical
systems, such as pipes, ducts, and boilers, where the mechanical
systems are to remain.
CERAMIC TILE FINISHER, MARBLE FINISHER, TERRAZZO FINISHER
Assisting, helping or supporting the tile, marble and terrazzo
mechanic by performing their historic and traditional work assignments
required to complete the proper installation of the work covered by
said crafts. The term "Ceramic" is used for naming the classification
only and is in no way a limitation of the product handled. Ceramic
takes into consideration most hard tiles.
COMMUNICATIONS TECHNICIAN
Installing, manufacturing, assembling and maintaining sound and
intercom, protection alarm (security), fire alarm, master antenna
television, closed circuit television, low voltage control for
computers and/or door monitoring, school communications systems,
telephones and servicing of nurse and emergency calls, and the
installation and maintenance of transmit and receive antennas,
transmitters, receivers, and associated apparatus which operates in
conjunction with above systems. All work associated with these system
installations will be included EXCEPT the installation of protective
metallic conduit in new construction projects (excluding less than
ten-foot runs strictly for protection of cable) and 120 volt AC (or
higher) power wiring and associated hardware.
LABORER, SKILLED - HIGHWAY
Individuals engaged in the following types of work, irrespective of
the site of the work: asbestos abatement worker, handling of any
materials with any foreign matter harmful to skin or clothing, track
laborer, cement handlers, chloride handlers, the unloading and loading
with steel workers and re-bars, concrete workers wet, tunnel helpers
in free air, batch dumpers, mason tenders, kettle and tar men, tank
cleaners, plastic installers, scaffold workers, motorized buggies or
motorized unit used for wet concrete or handling of building
materials, laborers with de-watering systems, sewer workers plus
depth, rod and chainmen with technical engineers, rod and chainmen
with land surveyors, rod and chainmen with surveyors, vibrator
operators, cement silica, clay, fly ash, lime and plasters, handlers
(bulk or bag), cofferdam workers plus depth, on concrete paving,
placing, cutting and tying of reinforcing, deck hand, dredge hand, and
shore laborers, bankmen on floating plant, grade checker, power
tools, front end man on chip spreaders, cassion workers plus depth,
gunnite nozzle men, lead man on sewer work, welders, cutters, burners
and torchmen, chainsaw operators, jackhammer and drill operators,
layout man and/or drainage tile layer, steel form setter - street and
highway, air tamping hammermen, signal man on crane, concrete saw
operator, screedman on asphalt pavers, laborers tending masons with
hot material or where foreign materials are used, mortar mixer
operators, multiple concrete duct - leadsman, lumen, asphalt raker,
curb asphalt machine operator, ready mix scalemen (permanent, portable
or temporary plant), laborers handling masterplate or similar
materials, laser beam operator, concrete burning machine operator,
coring machine operator, plaster tender, underpinning and shoring of
buildings, pump men, manhole and catch basin, dirt and stone tamper,
hose men on concrete pumps, hazardous waste worker, lead base paint
abatement worker, lining of pipe, refusing machine, assisting on
direct boring machine, the work of laying watermain, fire hydrants,
all mechanical joints to watermain work, sewer worker, and tapping
water service and forced lift station mechanical worker.
MATERIAL TESTER I: Hand coring and drilling for testing of materials;
field inspection of uncured concrete and asphalt.
MATERIAL TESTER II: Field inspection of welds, structural steel,
fireproofing, masonry, soil, facade, reinforcing steel, formwork,
cured concrete, and concrete and asphalt batch plants; adjusting
proportions of bituminous mixtures.
TRUCK DRIVER - BUILDING, HEAVY AND HIGHWAY CONSTRUCTION - SOUTH
Class 1. Drivers on 2 axle trucks hauling less than 9 ton. Air
compressor and welding machines and brooms, including those pulled by
separate units, truck driver helpers, warehouse employees, mechanic
helpers, greasers and tiremen, pickup trucks when hauling materials,
tools, or workers to and from and on-the-job site, and fork lifts up
to 6,000 lb. capacity.
Class 2. Two or three axle trucks hauling more than 9 ton but hauling
less than 16 ton. A-frame winch trucks, hydrolift trucks, vactor
trucks or similar equipment when used for transportation purposes.
Fork lifts over 6,000 lb. capacity, winch trucks, four axle
combination units, and ticket writers.
Class 3. Two, three or four axle trucks hauling 16 ton or more.
Drivers on water pulls, articulated dump trucks, mechanics and
working forepersons, and dispatchers. Five axle or more combination
units.
Class 4. Low Boy and Oil Distributors.
Class 5. Drivers who require special protective clothing while
employed on hazardous waste work.
TRUCK DRIVER - OIL AND CHIP RESEALING ONLY.
This shall encompass laborers, workers and mechanics who drive
contractor or subcontractor owned, leased, or hired pickup, dump,
service, or oil distributor trucks. The work includes transporting
materials and equipment (including but not limited to, oils, aggregate
supplies, parts, machinery and tools) to or from the job site;
distributing oil or liquid asphalt and aggregate; stock piling
material when in connection with the actual oil and chip contract.
The Truck Driver (Oil & Chip Resealing) wage classification does not
include supplier delivered materials.
TRUCK DRIVER - BUILDING, HEAVY AND HIGHWAY CONSTRUCTION - EAST AND
NORTH
Class 1. Two or three Axle Trucks. A-frame Truck when used for
transportation purposes; Air Compressors and Welding Machines,
including those pulled by cars, pick-up trucks and tractors;
Ambulances; Batch Gate Lockers; Batch Hopperman; Car and Truck
Washers; Carry-alls; Fork Lifts and Hoisters; Helpers; Mechanics
Helpers and Greasers; Oil Distributors 2-man operation; Pavement
Breakers; Pole Trailer, up to 40 feet; Power Mower Tractors;
Self-propelled Chip Spreader; Skipman; Slurry Trucks, 2-man operation;
Slurry Truck Conveyor Operation, 2 or 3 man; Teamsters; Unskilled
dumpman; and Truck Drivers hauling warning lights, barricades, and
portable toilets on the job site.
Class 2. Four axle trucks; Dump Crets and Adgetors under 7 yards;
Dumpsters, Track Trucks, Euclids, Hug Bottom Dump Turnapulls or
Turnatrailers when pulling other than self-loading equipment or
similar equipment under 16 cubic yards; Mixer Trucks under 7 yards;
Ready-mix Plant Hopper Operator, and Winch Trucks, 2 Axles.
Class 3. Five axle trucks; Dump Crets and Adgetors 7 yards and over;
Dumpsters, Track Trucks, Euclids, Hug Bottom Dump Turnatrailers or
turnapulls when pulling other than self-loading equipment or similar
equipment over 16 cubic yards; Explosives and/or Fission Material
Trucks; Mixer Trucks 7 yards or over; Mobile Cranes while in transit;
Oil Distributors, 1-man operation; Pole Trailer, over 40 feet; Pole
and Expandable Trailers hauling material over 50 feet long; Slurry
trucks, 1-man operation; Winch trucks, 3 axles or more;
mechanic--Truck Welder and Truck Painter.
Class 4. Six axle trucks; Dual-purpose vehicles, such as mounted
crane trucks with hoist and accessories; Foreman; Master Mechanic;
Self-loading equipment like P.B. and trucks with scoops on the front.
OPERATING ENGINEERS - BUILDING
Class 1. Assistant Craft Foreman; Craft Foreman; Mechanic; Asphalt
Plant; Asphalt Spreader; Autograde; Batch Plant; Benoto (requires Two
Engineers); Boiler and Throttle Valve; Caisson Rigs; Central Redi-Mix
Plant; Combination Back Hoe Front End-loader Machine; Compressor and
Throttle Valve; Concrete Breaker (Truck
Mounted); Concrete Conveyor; Concrete Paver; Concrete Placer; Concrete
Pump (Truck Mounted); Concrete Tower, Cranes, All, Cranes,
Hammerhead, Creter Crane; Crusher, Stone, etc.; Derricks, All;
Derricks, Traveling; Formless Curb and Gutter Machine; Grader,
Elevating; Grouting Machines; Highlift Shovels or Front Endloader
2-1/4 yd. and over; Hoists, Elevators, outside type rack and pinion
and similar machines; Hoists, one, two and three Drum; Hoists, Two
tugger One Floor; Hydraulic Backhoes; Hydraulic Boom Trucks;
Locomotives, All; Motor Patrol; Pile Drivers and Skid Rig; Post Hole
Digger; Pre-Stress Machine; Pump Cretes; Squeeze Cretes-screw Type
Pumps; Gypsum Bulker and Pump; Raised and Blind Hole Drill; Rock
Drill; Roto Mill Grinder; Scoops - Tractor Drawn; Slip-form Paver;
Straddle Buggies; Tie Back Machine; Tractor with Book and Side Boom;
Trenching Machines.
Class 2. Bobcat (over 3/4 cu. yd.); Boilers; Brick Forklift; Broom,
All Power Propelled; Bulldozers; Concrete Mixer (Two Bag and Over);
Conveyor, Portable; Forklift Trucks; Greaser Engineer; Highlift
Shovels or Front Endloaders under 2-1/4 yd.; Hoists, Automatic;
Hoists, Sewer Dragging Machine; Hoists, Tugger Single Drum; Rollers,
All; Steam Generators; Tractors, All; Tractor Drawn Vibratory Roller;
Winch Trucks with "A" Frame.
Class 3. Air Compressor; Asphalt Spreader; Combination - Small
Equipment Operator; Generators; Heaters, Mechanical; Hoists, Inside
Elevators - (Rheostat Manual
Controlled); Hydraulic Power Units (Pile Driving and Extracting);
Pumps, over 3" (1 to 3 not to exceed a total of 300 ft.); Pumps, Well
Points; Welding Machines (2 through 5); Winches, 4 small Electric
Drill Winches; Bobcat (up to and including 3/4 cu. yd.).
Class 4. Hoists, Inside Elevators, Push Button with Automatic Doors;
Oilers; Brick Forklift.
OPERATING ENGINEERS - HEAVY AND HIGHWAY CONSTRUCTION
Class 1. Craft Foreman; Asphalt Plant, Asphalt Heater and Planer
Combination; Asphalt Heater Scarfire; Asphalt Silo Tender; Asphalt
Spreader; Autograder; ABG Paver; Backhoes with Caisson attachment;
Ballast Regulator, Belt Loader; Caisson Rigs; Car Dumper; Central
Redi-Mix Plant; Backhoe w/shear attachments; Combination Backhoe Front
Endloader Machine, (1 cu. yd. Backhoe Bucket or over or with
attachments); Concrete Breaker (Truck mounted): Concrete Conveyor;
Concrete Paver over 27E cu. ft.; Concrete Placer; Concrete Tube Float;
Cranes, all attachments; Cranes, Hammerhead, Linden, Peco & Machines
of a like nature; Crete Crane; Crusher, Stone, etc.; Derricks, All;
Derrick Boats; Derricks, Traveling; Directional Boring Machine over
12"; Dredges; Field Mechanic-Welder; Formless Curb and Gutter Machine;
Gradall and Machines of a like nature; Grader, levating; Grader,
Motor Grader, Motor Patrol, Auto Patrol, Form Grader, Pull Grader,
Subgrader; Guard Rail Post Driver Mounted; Hoists, One, Two and Three
Drum; Hydraulic Backhoes; Pile Drivers and Skid Rig; Pre-Stress
Machine; Pump Cretes Dual Ram; Rock Drill - Crawler or Skid Rig; Rock
Drill - Truck Mounted; Rock/Track Tamper; Roto Mill Grinder; Slip-Form
Paver; Soil Test Drill Rig (Truck Mounted); Straddle Buggies; GCI
Crane; Hydraulic Telescoping form (Tunnel); Tie Back Machine; Tractor
Drawn Belt Loader; Tractor with Boom; Tractor-aire with
Attachments; Traffic Barrier conveyor machine; Raised or Blind Hole;
Trenching Machine; Truck Mounted Concrete Pump with Boom; Truck
Mounted Concrete Conveyor; Underground Boring and/or Mining Machines;
Wheel Excavator; Widener (APSCO).
Class 2. Batch Plant; Bituminous Mixer; Boiler and Throttle Valve;
Bulldozers; Car Loader Trailing Conveyors; Combination Backhoe Front
Endloader Machine (less than 1 cu. yd. Backhoe Bucket or over or with
attachments); Compressor and Throttle Valve; Compressor, Common
Receiver (3); Concrete Breaker or Hydro Hammer; Concrete Grinding
Machine; Concrete Mixer or Paver 7S Series to and including 27 cu.
ft.; Concrete Spreader; Concrete Curing Machine, Burlap Machine,
Belting Machine and Sealing Machine; Conveyor Muck Cars (Haglund or
Similar Type); Drills, all; Finishing Machine - Concrete; Greaser
Engineer; Highlift Shovels or
Front Endloader; Hoist - Sewer Dragging Machine; Hydraulic Boom Trucks
(All Attachments); Hydro Blaster; Laser Screed; All Locomotives,
Dinky; Pump Cretes;
Squeeze Cretes-Screw Type Pumps, Gypsum Bulker and Pump; Roller,
Asphalt; Rotory Snow Plows; Rototiller, Seaman, etc., self-propelled;
Scoops - Tractor Drawn; Self-Propelled Compactor; Spreader - Chip -
Stone, etc.; Scraper; Scraper - Prime Mover in Tandem (Regardless of
Size); Tank Car Heater; Tractors, Push, Pulling Sheeps Foot, Disc,
Compactor, etc. Tug Boats.
Class 3. Boilers; Brooms, All Power Propelled; Cement Supply Tender;
Compressor, Common Receiver (2); Concrete Mixer (Two Bag and Over);
Conveyor, Portable; Farm-Type Tractors Used for Mowing, Seeding, etc.;
Fireman on Boilers; Forklift Trucks; Grouting Machine; Hoists,
Automatic; Hoists, All Elevators; Hoists, Tugger Single Drum; Jeep
Diggers, Low Boys; Pipe Jacking Machines; Post-Hole Digger; Power Saw,
Concrete Power Driven; Pug Mills; Rollers, other than asphalt; Seed
and Straw Blower; Steam Generators; Stump Machine; Winch Trucks with
"A" Frame; Work Boats; Tamper - Form-Motor Driven.
Class 4. Air Compressor - Small and Large; Asphalt Spreader, Backend
Man; Bobcat (Skid Steer) all; Combination - Small Equipment Operator;
Directional Boring Machine up to 12"; Generators - Small 50kw and
Under; Generators - Large over 50kw; Heaters, Mechanical; Hydraulic
Power Unit (Pile Driving, Extracting, or Drilling); Hydro-Blaster;
Light Plants, All (1 through 5); Pumps, over 3" (1 to 3 not to exceed
a total of 300 ft.); Pumps, Well Points; Tract-aire; Welding Machines
(2 through 5); Winches, 4 Small Electric Drill Winches.
Class 5. Oilers and Directional Boring Machine Locator.
Other Classifications of Work:
For definitions of classifications not otherwise set out, the
Department generally has on file such definitions which are available.
If a task to be performed is not subject to one of the
classifications of pay set out, the Department will upon being
contacted state which neighboring county has such a classification and
provide such rate, such rate being deemed to exist by reference in
this document. If no neighboring county rate applies to the task, the
Department shall undertake a special determination, such special
determination being then deemed to have existed under this
determination. If a project requires these, or any classification not
listed, please contact IDOL at 217-782-1710 for wage rates or
clarifications.
LANDSCAPING
Landscaping work falls under the existing classifications for laborer,
operating engineer and truck driver. The work performed by landscape
plantsman and landscape laborer is covered by the existing
classification of laborer. The work performed by landscape operators
(regardless of equipment used or its size) is covered by the
classifications of operating engineer. The work performed by
landscape truck drivers (regardless of size of truck driven) is
covered by the
classifications of truck driver.
|